Gold and Silver Push Ingot Mold Patterns!
Cast Your Own Silver and Gold Bars and Rounds!
Pour Your Own Gold and Silver Bars and Rounds!
YOU DO NOT POUR INTO MY PATTERNS!
YOU POUR INTO CASTING MEDIA!
Pour Into Delft Clay, Petrobond, Kinetic Sand and Other Media!
Click... "See other items" to see our other Detailed Patterns!
You are allowed to sell your cast and poured gold and silver bars and rounds
but are 1not allowed to make molds from our patterns or sell patterns!
We do not sell graphite molds! Graphite ingot molds are expensive, they are
not as detailed as our Gold and Silver Push Ingot Mold Patterns and can only be
used for a limited number of casts.
Our Gold and Silver Push Ingot Mold Patterns can last forever with proper
care. Our Ingot Mold Patterns have a Flexural Strength of 4,510 psi a
Compressive Strength of 4,000 psi with a Shore Hardness of 70 D.
The first image above is the 3D image that was used to machine the Master Gold
and Silver Push Ingot Mold Pattern. The second image shows what you will
receive, the Larger Dragon Bar Pattern. The third image shows the included,
pre drilled screw hole and screw. The screw makes it easy to remove the
pattern from the casting media.
The pictures suck but the Gold and Silver Push Ingot Mold Patterns are very
detailed. Included is a screw. Hand tighten the screw into the pilot hole in
the center of the pattern. The screw not only makes for easy, precise removal
of the ingot pattern from your casting media it allows you to push the ingot
mold pattern deeper into the casting media.Do not push on the screw! The screw
is only for the removal of the ingot pattern from the casting media. Always
apply even pressure on the ingot pattern when pushing the pattern into your
casting media. Pushing the ingot pattern deeper into the casting media allows
for precise, measured amounts of molten metal to be cast and is also useful to
make chunky bars and rounds from any of our Gold and Silver Push Ingot Mold
The remaining pics above are some of the other Gold and Silver Push Ingot Mold
Pattern we have for sale on . (Pattern number, names and sizes are below)
We will be adding new patterns regularly so check our listing regularly.
We machine a Master Mold with the tiniest of micro bits to retain incredible
detail. It literally takes 15 to 30 hours to machine each Master Mold! The
Master Mold is used to cast the Gold and Silver Push Ingot Mold Pattern that
you will receive.
We leave square, sharp edges for those who prefer square, sharp edges. If you
prefer rounded edges simply sand the sharp edges. Some of the patterns need to
be sanded. This adds character to the ingot. For example #140 – Skull Bar
Pattern can be cast as is but my preference is to sand down the notches on two
Our ingot mold patterns are manufactured for the casting and open pouring of
Gold, Silver and other metals using Delft Clay, Green Sand, Petrobond, Kinetic
Sand or whatever casting medium that you use. (I do not know if my push mold
objects are suitable for making polymer clay molds) Simply push them into your
casting media to leave the impression in your casting media. Many can also be
used with two sided casting rings and flasks.
All of our Gold and Silver Push Ingot Mold Patterns can be open poured. Many
can be cast with two sided casting rings and flasks. Our longer or larger push
molds can be open poured in 3" to 4" pieces of 3" or 4" or 6" pvc pipe.
Below are the measurements of our Gold and Silver Push Ingot Mold Patterns in
millimeters rounded off to the closest whole millimeter. Most of these patterns
can be viewed in the pics above.
11-American Skull 40x25x11
15-Ax Girl 40x33x9
163-Spider Round 34x12
175-Tree-Life-Nude-Small & Chunky 39x27x12 and 51x36x22